Replacement Barend Buttons
Replace just your barend buttons instead of buying new barends if you damage them in a fall. All styles of buttons are available as spares. Kit includes 2 matched buttons only. Please contact us at firstname.lastname@example.org if your mounting screws have been damaged as well.
Please specify the correct mounting bolt size when ordering. Most barends, including those using our adapters, use M6 Screws. Kawasaki, Ducati Monster S4 and some BMWs use M8 bolts. If in doubt, the store entry for your product should specify the bolt size. Triumph kits except Speed Triple use M5 bolts. M5 size is offered in round and flat styles only.
Please note that the sizes listed are for the thread diameter of the screw used to attache the buttons. If you are unsure of the size, one way to check is that the hex key used is 1mm smaller than the thread size. For example, the M6 screw uses a 5mm hex key. Also, for those used to English sizes, M6 is roughly equivalent to 1/4-20, M5 to 10-32 and M8 to 3/8″ threads.
|Dimensions||2 × 4 × 1 in|
Flat Buttons, Round Buttons, Tapered Buttons
M12, M5, M6, M8